1535/1537
Users Manual
1
Item
E - Earth Terminal
A
L - Live Terminal
B
The Tester does not have specified accuracy below 200 kΩ . When
you do a test below 200 kΩ or with the leads shorted, the Tester can
show a reading. This is normal for the input circuitry configuration for
this Tester. Only the readings within the specified accuracy range are
accurate.
Before an Insulation Test
The Tester includes features that let you adapt the test to your requirements.
You can:
•
Define a test voltage
•
Measure polarization index (PI)
•
Measure dielectric absorption ratio (DAR)
14
Table 5. Test Lead Connections
L
E
2
Description
Note