BMW X5 Owner's Manual page 278

CONTROLS
Park assistance button
Sensors
The system is controlled by the following sen‐
sors:
▷ Radar sensors, side, rear.
▷ Depending on the equipment: radar sensors,
side, front.
Additional information:
Sensors of the vehicle, refer to page 37.
Switching on/off
Activating/deactivating the system
With the button
1. Press the park assistance button.
2. Tilt the Controller to the right.
3. "Settings"
4. "Cross Traffic Warning"
5. "Cross traffic warning"
Via iDrive
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. "Parking and Maneuvering"
5. "Cross Traffic Warning"
6. "Cross traffic warning"
Turning on automatically
If the system was activated on the Control Dis‐
play, it is automatically switched on as soon as
PDC Park Distance Control or Panorama View is
active and a gear is engaged.
If reverse gear is engaged, the rear system is
switched on.
278
Driver assistance systems
Online Edition for Part no. 01405A37D22 - VI/21
Depending on the vehicle equipment, the front
system is switched on when a forward gear is
engaged.
Switching off automatically
The system is automatically switched off in the
following situations:
▷ When the speed exceeds walking speed.
▷ When a certain driving distance is exceeded.
▷ With an active parking operation of the Auto‐
matic Parking Assistant.
Warning
General information
The respective display is called up on the Con‐
trol Display. A signal tone may sound and the
light in the exterior mirror may flash.
Light in the exterior mirror
The light in the exterior mirror flashes if vehicles
are detected by the rear sensors and your own
vehicle is moving in reverse.