BMW X5 Owner's Manual page 272

CONTROLS
Lanes depend on the steering angle and are
continuously adjusted to the steering wheel
movements.
Turning circle lines
Turning circle lines can only be superimposed on
the camera image together with lanes.
Turning circle lines show the course of the small‐
est possible turning radius on a level road.
Only one turning circle line is displayed after the
steering wheel is turned past a certain angle.
Parking using lanes and turning circle lines
1. Position the vehicle so that the red turning
circle line leads to within the limits of the
parking space.
2. Turn the steering wheel to the point where
the green lane covers the corresponding
turning circle line.
Obstacle marking
Obstacles behind the vehicle are detected by the
PDC Park Distance Control sensors.
272
Driver assistance systems
Online Edition for Part no. 01405A37D22 - VI/21
Obstacle markings can be shown in the camera
image.
The colored thresholds of the obstacle markings
match the markings of the PDC Park Distance
Control.
Car wash view
The car wash view assists when entering a car
wash by displaying the floor and the vehicle's
own track.
Zoom on trailer hitch
To make it easier to attach a trailer, you can
zoom in on the view of the trailer hitch.
Two static circle segments show the distance
between the trailer and the trailer hitch.
A docking line dependent on the steering angle
helps with aiming for the trailer with the trailer
hitch.
When zooming in, remember that the view may
no longer show certain obstacles.