BMW X5 Owner's Manual page 261

Obstacle marking
Depending on the vehicle equipment, obstacles
behind the vehicle are detected by the PDC Park
Distance Control sensors.
Obstacle markings can be faded into the image
of the rearview camera.
The colored thresholds of the obstacle markings
match the markings of the PDC Park Distance
Control.
Zoom on trailer hitch
To make it easier to attach a trailer, you can
zoom in on the view of the trailer hitch.
Two static circle segments show the distance
between the trailer and the trailer hitch.
A docking line dependent on the steering angle
helps with aiming for the trailer with the trailer
hitch.
When zooming in, remember that the view may
no longer show certain obstacles.
Driver assistance systems
Online Edition for Part no. 01405A37D22 - VI/21
Setting brightness and contrast
With the rearview camera switched on:
1. Move the Controller to the right, if needed.
2. "Camera image"
3. Select the desired setting.
System limits
System limits of the sensors
Additional information:
▷ Cameras, refer to page 37.
Deactivated camera
When the camera is deactivated, for instance
when the tailgate is open, the camera image is
displayed hatched in gray.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
Depending on the vehicle equipment, some as‐
sistance functions also consider data from the
PDC Park Distance Control.
Follow the notes in the PDC Park Distance Con‐
trol chapter.
The objects displayed on the Control Display
may be closer than they appear. Do not estimate
the distance from the objects on the display.
CONTROLS
261