Mounting The Antenna - Garmin Tread Owner's Manual

Mounting the Antenna

NOTE: the mounted antenna must be at least 4 cm (1.57 in.) away from the nearest roll bar or metal surface to
avoid radio interference.
You can use the external antenna mount to mount your antenna in a more suitable location for your vehicle,
such as a roll bar at the rear of your vehicle, to receive better radio reception. For the best results, use this
method for vehicles that have a roll cage.
1 Screw down and tighten the antenna cable onto the Group Ride mount .
2 Find a suitable location for the antenna.
5
3 Using a flat-head screwdriver or / -in. (8-mm) nut driver, loosen the bolt on the external antenna mount
16
until the ring separates.
4 Place the mount around the roll bar.
5 Tighten the bolt on the mount until the ring is secure.
6 Installation