Installation Method for Diffuse-reflective Sensor Heads
Using a E39-L178, E39-L179 Mounting Bracket:
1
*
Phillips screws
*
1 The measurement distance reference position is
the Sensor's sensing surface.
Note: When securing the Sensor Head in the
(32)
22.6
Nut plate
Mounting Bracket
Mounting Bracket, insert the screws
into the side of the Sensor Head where
the warning label is located and secure
the Sensor Head into place.
Not Using a Mounting Bracket:
Mount the Sensor Head in relation to the workpiece as shown below.
*
L
Measurement
center distance
4.0
workpiece
±0.05
Для заказов: +7(499)707-11-20,
Email: i@sp-t.ru
8-800-511-65-88(Бесплатно по РФ)
ZX2
31.5
±0.05
39.5±0.05
*
ZX2-LD50 (L): 50
ZX2-LD100 (L): 100
14