Changing The Buzzer Level; Label Programming - DSC Power Series Manual

DSC Power Series PC1616 PC1832 PC1864 System Manual
desired level.
Contrast Control': There are 10 different display contrast levels. Use the [< >] keys to scroll to
the desired contrast level.
5. To exit, press [#].

Changing the Buzzer Level

PK5500/LCD5500
When this option is selected, the keypad will allow you to scroll through 21 different buzzer levels. A level
of 00 disables the buzzer.
1. Press [*][6][Master Code].
2. Use the [< >] keys to scroll to Buzzer Control.
3. There are 21 different levels, use the [< >] keys to scroll to the desired level.
PK5501/PK5508/PK5516
1. Press [*][6][Master Code].
2. Use the [<] key to scroll to move through the 21 different buzzer levels.
3. The level is automatically saved when you press [#] to exit.

Label Programming

PK5500/LCD5500
When this option is selected, the keypad will allow you to program labels representing zones, partitions,
and command outputs. Also, special labels can be added to show when the system fails to arm or when
you disarm after an alarm has occurred.
1. Press [*][6][Master Code].
2. Use the [< >] keys to scroll to Edit Labels.
3. Use the [< >] keys to select the label type you want to edit.
4. Use the [< >] keys to select the individual label you want to edit.
5. Use the arrow keys ([< >]) to move the underline bar underneath the letter to be changed.
6. Press the number keys [1] to [9] corresponding to the letter you require. The first time you press
the number the first letter will appear. Pressing the number key again will display the next letter.
Refer to the following:
[1] - A, B, C, 1
[2] - D, E, F, 2
https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]