Wi-Fi Connection - Honda CR-V 2017 Manual

uuAudio System Basic OperationuWi-Fi Connection

Wi-Fi Connection

You can connect the Display Audio to the Internet using Wi-Fi and browse websites
or use online services on the audio/information screen. If your phone has wireless
hotspot capabilities, the system can be tethered to the phone. Use the following
steps to setup.
■
Wi-Fi mode (setting for the first time)
354
1. Select .
2. Select Settings.
3. Select Bluetooth / Wi-Fi.
4. Select the Wi-Fi tab.
5. Select Wi-Fi On/Off Status, then select
On.
6. Select Yes.
7. Select Wi-Fi Device List.
u Make sure your phone's Wi-Fi setting is
in access point (tethering) mode.
u Select the phone you want to connect to
the system.
u If you do not find the phone you want to
connect in the list, select Scan.
1Wi-Fi mode (setting for the first time)
You cannot go through the setting procedure while a
vehicle is moving. Park in a safe place to set the audio
system in Wi-Fi mode.
Some mobile phone carriers charge for tethering and
smartphone data use. Check your phone's data
subscription package.
Check your phone manual to find out if the phone
has Wi-Fi connectivity.
You can confirm whether Wi-Fi connection is on or
off with the icon on the Wi-Fi Device List
screen. Network speed will not be displayed on this
screen.