Light Switches - Honda CR-V 2017 Manual

uuOperating the Switches Around the Steering WheeluLight Switches

Light Switches

■
Manual Operation
Indonesian models
High Beams
Flashing the high beams
Low Beams
Malaysian and Taiwanese models
High Beams
Flashing the high beams
Low Beams
Turns on position, tail, and rear
licence plate lights
Turns on headlights, position,
tail, and rear licence plate lights
210
Rotating the light switch turns the lights on
and off, regardless of the power mode
setting.
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
Malaysian and Taiwanese models
■
Lights off
Turn the lever to OFF either when:
• The transmission is in P .
(
• The parking brake is applied.
To turn the lights on again, turn the lever to
OFF to cancel the lights off mode. Even if you
do not cancel the lights off mode, the lights
come on automatically when:
• The transmission is taken out of
parking brake is released.
• The vehicle starts to move.
1Light Switches
If you leave the power mode in VEHICLE OFF (LOCK)
while the lights are on, a chime sounds when the
driver's door is opened.
When the lights are on, the lights on indicator in the
instrument panel will be on.
2 Indicators P. 102
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
P and the
(