Indicators - Honda CR-V 2017 Manual

Indicators

Indicator Name
Parking
Brake
and
Brake
System
(Red)
Indicator
(Red)
*1:Except Taiwanese models
*2:Taiwanese models
* Not available on all models
102
On/Blinking
● Comes on for a few seconds
when you set the power mode to
ON, then goes off if the parking
brake has been released.
Comes on when the parking
●
brake is applied and goes off
when it is released.
Comes on when the brake fluid
●
level is low.
Comes on if there is a problem
●
with the brake system.
The beeper sounds and the
●
indicator comes on if you drive
with the parking brake not fully
released.
Comes on for about 15 seconds
●
when you apply the electric
parking brake while the power
mode is in ACCESSORY or
VEHICLE OFF, then goes off.
● Stays on for about 15 seconds
when you set the power mode to
VEHICLE OFF while the electric
parking brake is applied, then
goes off.
Explanation
● Comes on while driving - Make sure the
parking brake is released. Check the brake fluid
level.
2 What to do when the indicator comes on
P. 645
Comes on along with the brake system
●
indicator (amber) - Immediately stop in a safe
place. Contact a dealer for repair. The brake
pedal becomes harder to operate. Depress the
pedal further than you normally do.
Comes on along with the ABS indicator -
●
Have your vehicle checked by a dealer.
2 If the Brake System Indicator (Red) Comes
On or Blinks P. 647
Blinks and the parking brake and brake
●
system indicator (amber) comes on at the
same time - There is a problem with the electric
parking brake system. The parking brake may
not be set.
Avoid using the parking brake and have your
vehicle checked by a dealer immediately.
2 If the Brake System Indicator (Red) comes
on or blinks at the same time when the
Brake System Indicator (Amber) comes on
P. 648
Message *
*1
*2