Table of Contents
Advertisement
8.3 Install four nuts (11) that secure the
transformer to chassis (2) and one that
secures the ground lug to chassis.
8.4 Solder the secondary wires to the
power connector.
9. Power Connector Removal
9.1 Remove the two screws (10) that
secure the power connector (16) to the
chassis (2).
9.2 Slide the power connector out of the
chassis's rear panel.
10. Power Connector Replacement
10.1 Slide the power connector (16) into
the chassis's rear panel.
10.2 Install two screws (10) that secure the
power connector to the chassis (2).
10.3 Solder wires from switch and trans-
former to power connector.
11. Power Switch Removal
11.1 Unplug the red wires from the power
switch (6).
11.2 Squeeze the fastener at the rear of
switch.
11.3 Push the power switch out of the front
panel (4).
12. Power Switch Replacement
12. 1 Orient the power switch (6) so the
switch's spades are down.
12.2 Push the power switch into the front
panel (4) until the switch snaps into place.
12.3 Reconnect the red wires to the power
switch.
13. Front Panel Removal
13.1 Remove four screws (8) which secure
the front panel (4) to chassis (2).
13.2 Slide the front panel forward.
14. Front Panel Replacement
14.1 Slide front panel (4) onto chassis so
that the lip fits over top cover and bottom.
14.2 Reinstall four screws (8) which secure
front panel to unit.
10
Advertisement
Table of Contents
