Connection and wiring diagram
Notes
■ Observe the information on electrical connections in the
installation and service instructions.
■ In the case of a power supply with power-OFF facility, the
power to the control circuit (heat pump control unit) must be
1
supplied without interruption by the power supply utility.
■ Identification of electrical equipment (in accordance with
DIN/IEC 81346-2):
Electrical equipment
B
Pressure switch, temperature switch, thermal relay
F
MCB/fuse, thermal relay
J
Plug-in connector
K
Contactors, relays
M
Motor, circulation pump, motorised valve, compressor
Q
Mains isolator, contactor
R
Choke coil
S
Control switch
T
Inverter
X
Terminals, plugs
4
Example: /7.5
/
= Cross-reference
7. = Sheet number
5 = Current path