Table of Contents
Advertisement
If more than one alarm time comes during
recording, only the first message will be
played back.
When the alarm time comes when the unit is
in the menu mode, alarm will sound and the
menu mode will be canceled.
If you erase the message you set the alarm to
play back, the alarm setting will be canceled.
If you divide a message with the playback
alarm, playback will stop at the point you
divided a message.
You can adjust the playback volume with the
VOL control.
If the alarm time comes during erasing,
alarm will sound for 10 seconds after the
erasing is finished and playback begins.
Alarm setting will not be canceled when
the alarm playback finishes. To cancel alarm
setting, see below.
To cancel or change the alarm
setting
1
Select the message you set the
alarm to play back, and press
DISPLAY/MENU for more than 1
second to enter the menu mode.
2
Press –
or
"ALARM ON."
3
Press
PLAY/ENTER to flash
"ON."
4
To cancel the alarm setting: Press
–
or
+ to flash "OFF" and
press
PLAY/ENTER.
To change the alarm setting: Press
PLAY/ENTER. When the alarm
date is displayed, follow the Steps 3
to 6 of "Playing Back a Message at a
Desired Time with an Alarm" to change
the alarm setting.
5
Press
(stop) to exit the menu
mode.
+ to select
GB
Advertisement
Table of Contents
