3
Set the time.
Press –
digits of the hour.
Press
The minute digits will flash.
Set the minute.
Press
signal.
The display will return to "SET DATE. "
Press
(stop) to exit from the menu
mode.
If the unit is left unused for more
than 3 seconds in the stop mode, the
display will show the current time.
Tips
This unit does not have a power on/off
switch. The display is shown at all times.
You can select the 12-hour display using the
menu. To set the 12-hour display, select "12H"
in the "HOUR" menu. In that case, "AM12:00"
will appear in step 2-
1
GB
or
+ to select the
PLAY/ENTER.
PLAY/ENTER at the time
.