Table of Contents
Advertisement
Crankcase - Static description
The cylinder block is an alloy cast iron with deep cylinder skirts, and it also incorporates the coolant circulation cham-
bers and the engine member lubricating circuit ducts.
The cylinder bores are machined integral with the cylinder block, during the manufacturing process.
Cylinders are in line and vertical and numbered 1 to 4 from the front to the rear of the engine.
The block incorporates hydraulic tappets which do not require adjustment unless engine is being reassembled.
(1)
Cylinder Number 1
(2)
Seat for the water pump
(3)
Seat for the oil pump
(4)
Seat for distributing shaft bushings
(5)
Bed supports
Engine - Engine and crankcase
1
CRIL04J013G01
Crankcase
48144036 04/08/2017
10.1 [10.001] / 17
Advertisement
Chapters
Table of Contents
