Dell Latitude 7380 Owner's Manual page 32

c. Lift the eDP bracket from the eDP cable [3].
d. Disconnect the eDP cable from its connector on the system board [4].
NOTE: In touch-configuration system, you need to remove the touch display cable that is connected to its
connector on the system board.
e. Remove the adhesive tape that secures the eDP cable [5].
NOTE: In touch-configuration system,, you will find both eDP cable and touch display cable that is secured with
adhesive tape.
6. To remove the display assembly:
a. Open the display of the computer and lay it on a flat surface at 180 degree angle.
b. Remove the M2.5 x 4.0 screws (6) that secure the display hinge to the display assembly [1].
c. Lift the display assembly from the computer [2].
32 Disassembly and reassembly