Related Manuals for EverFocus eNVP-JNN-AI-A0000
Summary of Contents for EverFocus eNVP-JNN-AI-A0000
- Page 1 NVIDIA Jetson® Nano AI BOX User’s Manual Copyright © EverFocus Electronics Corp. Release Date: June 2021...
- Page 2 All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation. NVIDIA, the NVIDIA logo, and Jetson are trademarks of the NVIDIA Corporation ITE is a trademark of Integrated Technology Express, Inc.
- Page 3 All cautions and warnings on the device should be noted. All cables and adapters supplied by EverFocus are certified and in accordance with the material safety laws and regulations of the country of sale. Do not use any cables or adapters not supplied by EverFocus to prevent system malfunction or fires.
- Page 4 FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Caution: There is a danger of explosion if the battery is incorrectly replaced.
- Page 5 RoHS Requirements 設備名稱 (Equipment): AI Box，型號（型式）/ Type designation (Type): eNVP-JNN-AI-A0000 單元Ｕnit 限用物質及其化學符號 Restricted substances and its chemical symbols 六價鉻 多溴聯苯 多溴二苯醚 鉛 汞 鎘 Hexavalent Polybrominated Polybrominated Lead Mercury Cadmium chromium biphenyls diphenyl ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBBs) (PBDEs) 印刷電路板及電...
-
Page 6: Table Of Contents
TABLE OF CONTENTS Introduction ..........................1 Product Notice ........................ 1 Features .......................... 2 Dimensions ........................2 Packing List ........................3 Optional Accessories ....................... 3 Physical Description ......................3 Installation ..........................5 M.2 Module installation ....................5 Jumpers and Connectors on the Motherboard ..............6 List of Jumpers ........................ -
Page 7: Introduction
With its Quad-core ARM® Cortex®-A57 MPCore processor and various interfaces including 1 HDMI display output, 4 USB Gen 1 ports, 2 COM ports, and 1 GbE LAN port, the eNVP-JNN-AI-A0000 aims to deliver high-quality performance for your computing applications. -
Page 8: Features
1.2 Features • Fanless AI edge embedded box PC • Quad-core ARM® Cortex®-A57 MPCore processor • NVIDIA Maxwell™ architecture with 128 NVIDIA CUDA® cores • Onboard 4 GB 64-bit LPDDR4 memory • Supports 1 HDMI display output • Supports 4 USB 3.2 Gen 1 •... -
Page 9: Packing List
Note: 1. Equipment configurations and supplied accessories vary by country. Please consult your local EverFocus office or agents for more information. Please also keep the shipping carton for possible future use. 2. Contact the shipper if any items appear to have been damaged in the shipping process. - Page 10 Name Description COM Port Two RS-232 ports. Two Antenna ports. Power Button Press the button to turn on or turn off the system. One 10/100/1000 Base-Tx Ethernet ports. USB 3.2 Gen 1 Four USB 3.2 Gen 1 ports. HDMI One HDMI 1.4b video output.
-
Page 11: Installation
Chapter 2. Installation 2.1 M.2 Module installation M.2 module attaches to the main board. NVIDIA Jetson Nano module must be removed prior to installing M.2 module. -
Page 12: Jumpers And Connectors On The Motherboard
Chapter 3. Jumpers and Connectors on the Motherboard Users can use the jumpers and connectors to configure different applications. Component Side... -
Page 13: List Of Jumpers
Module Side 3.1 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers Label Function CN1 (Pin7-8) -
Page 14: Setting Jumpers
3.1.1 Setting Jumpers You can configure your system to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. -
Page 15: List Of Connectors
3.2 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors Label Function Front Panel Connector... -
Page 16: Front Panel Connector (Cn1)
3.2.1 Front Panel Connector (CN1) Signal Signal Button Power Recovery Reset Latch set Latch set PWR LED 3.2.2 DC Power In Connector (CN2) Signal Signal PWR_IN... -
Page 17: Usb 2.0 Connector For Flash Image (Cn3)
3.2.3 USB 2.0 Connector for Flash Image (CN3) Signal Signal USB1- USB1+ 3.2.4 LAN RJ45 Port (CN4) Signal Signal MDI0+ MDI0- MDI1+ MDI1- MDI2+ MDI2- MDI3+ MDI3-... -
Page 18: Hdmi Connector (Cn5)
3.2.5 HDMI Connector (CN5) Signal Signal HDMI_DATA_P HDMI_DATA_N HDMI_DATA1_P HDMI_DATA1_N HDMI_DATA0_P HDMI_DATA0_N HDMI_CLK_P HDMI_CLK_N HDMI_SCL HDMI_SDA HDMI_PWR HDMI_HDP... -
Page 19: Dual Usb 3.2 Gen 1 Connector (Cn6/Cn7)
3.2.6 Dual USB 3.2 Gen 1 Connector (CN6/CN7) Signal Signal VBUS_1 VBUS_2 (A)D- (B)D- (A)D+ (B)D+ (A)SSRX- (B)SSRX- (A)SSRX+ (B)SSRX+ (A)SSTX- (B)SSTX- (A)SSTX+ (B)SSTX+ 3.2.7 RTC Battery Connector (CN8) Signal Signal... -
Page 20: Output For Sata Hdd (Cn9/Ch10)
3.2.8 +5V Output for SATA HDD (CN9/CH10) RS-232 UART (3.3V) UART TXD UART RXD... -
Page 21: Com Port Connector (System)
3.2.9 COM Port Connector (System) RS-232 UART (3.3V) UART RXD UART TXD... -
Page 22: Jetson Nano Cpu Module Connector (Cn12)
3.2.10 Jetson Nano CPU Module Connector (CN12) -
Page 23: Uart Debug Port Connector (Cn15)
3.2.11 UART Debug Port Connector (CN15) 3.3V UART0 TXD UART0 RXD I2C SCL I2C SDA... -
Page 24: Specification
Video Output HDMI x 1 (2.0 maximum 3840 x 2160) Based on the installed software. Video Input EverFocus AiO NVR: up to 8ch. Resolution 4K @ 60fps x 1| 4K @ 30fps x 2 |1080p @ 30fps x 8 Interface Power LED x 1 USB 3.2 Gen 1 x 4... - Page 25 Recording Format H.265 / H.264 4K @ 60fps x 2| 4K @ 30fps x 4 |1080p @ 30fps x 16 Resolution Stroage SD Card MICRO SD X 1 Network Ethernet GbE port x 1 Wi-Fi Support (optional) General Power Supply...
- Page 26 FAX: +81 3 5820-1018 www.everfocus.com www.everfocus.co.jp sales@everfocus.com info@everfocus.co.jp Ihr EverFocus Produkt wurde entwickelt Your EverFocus product is designed and und hergestellt mit qualitativ manufactured with high quality materials hochwertigen Materialien und and components which can be recycled Komponenten, die recycelt und wieder and reused.