Table of Contents
Advertisement
SAFETY
Safety Alert Symbol
FIG. 19: The safety alert symbol means ATTENTION!
BECOME ALERT! YOUR SAFETY IS INVOLVED!
This safety alert symbol indicates important safety
messages in this Operator Manual. When you see this
symbol, carefully read the message that follows and be
alert to the possibility of personal injury or death.
Safety Signs
If a used machine has been purchased, be sure that all
safety signs are in the correct location and can be read.
Replace any safety signs that can not be read or are
missing. Replacement safety signs are available from
your dealer. The location of safety signs is illustrated at
the end of this section.
Safety Messages
FIG. 20: Whenever you see the words and symbols
shown below, used in this manual, you MUST take note of
their instructions as they relate to personal safety.
m
DANGER: Indicates
hazardous situation that, if not avoided, will
cause death or very serious injury.
m
WARNING: Indicates
hazardous situation that, if not avoided,
could result in death or serious injury.
m
CAUTION: Indicates
hazardous situation that, if not avoided,
may result in minor injury.
Informational Messages
The words IMPORTANT and NOTE are not related to
personal safety, but are used to give additional
information and tips for operating or servicing this
equipment.
IMPORTANT: Identifies
procedures which, if not strictly observed, could
result in damage to or destruction of the
machine, process, or its surroundings.
NOTE: Identifies points of particular interest for more
efficient and convenient repair or operation.
4283381M2
an
imminently
a
potentially
a
potentially
special
instructions
FIG. 19
FIG. 20
or
General Information
WC1957
01-13
Saf
Advertisement
Table of Contents
