Table of Contents
Advertisement
General Information
Mesh Wrap System (Optional)
FIG. 12: The baler is available with an optional mesh
wrap system (1) in addition to the twine system. The
mesh wrap assembly is mounted on the rear of the baler.
The operator selects either twine or mesh wrap from the
tractor using the console.
An electric actuator is used to engage and disengage the
mesh wrap system. The operator controls the mesh wrap
system from the tractor using the console.
See the Operation section for more details. The mesh
wrap is driven by the forming belts.
Control Console
FIG. 13: The control console contains the following:
(1)
Power switch
(2)
Drive left lamp
(3)
Drive lamp
(4)
Drive right lamp
(5)
Kicker switch
(6)
Twine/Mesh Wraps knob
(7)
Mesh Feed lamp
(8)
Auto Tie switch
(9)
Twine/Mesh Manual Control switch
01-10
1
FIG. 12
1
2
3
9
8
FIG. 13
N208600
5
4
6
7
N202312
4283381M2
Advertisement
Table of Contents
