Line Out; Connecting Other Devices - Sony Network Walkman NW-HD3 Operating Instructions Manual

Connecting Other
Devices
You can listen to tracks through a stereo
system and record tracks in the player
onto a MiniDisc or a cassette tape. See the
instruction manual that comes with the device
you want to connect.
Be sure to turn off all devices before making
the connections and changing the settings and
explained below.
Left (white)
MiniDisc recorder, AV amplifi er,
active speaker, cassette
recorder, etc.

to (headphones)/
LINE OUT jack
Connecting cord
(minijack, not supplied)
Right (red)
You need to change the setting for "Audio
Out" in the MENU display to output sound
to the connected device. The settings of
" Audio Out" are shown below. To make those
settings, see  page 29.
Connected device
Headphones
Device connected using the
connecting cord
When you connect another device, set this to
"Line Out." When the setting is "Line Out,"
volume cannot be adjusted, and the settings in
"Sound" is not available and do not work.
Notes
• When the supplied headphone is connected to the
player, do not set "Audio Out" to "Line Out." If it
is set to "Line Out," the volume cannot be adjusted
and the sound will be distorted and noisy.
• Before playback, turn down the volume of the
connected device to avoid damaging the connected
speaker.
Setting
Headphone

Line Out

35
GB