Sony Network Walkman NW-HD3 Operating Instructions Manual page 105

Message Meaning
HDD NOT • The hard disk of the player is not
INITIALIZED correctly initialized.
CORRECTLY
• The hard disk of the player was
initialized on the computer.
• The hard disk of the player has
not been initialized because it was
changed.
The HOLD switch is set to ON.
HOLD
LINE OUT NO When "Audio Out" is set to "Line
Out," you are trying to change the
OPERATION
volume or the setting of "Sound."
LOW BATTERY There is no remaining battery power.
MAX NO OF The number of groups (albums, artists,
etc.) exceeds the limit (8,192).
GROUPS
EXCEEDED
There is mismatch in the system fi les.
MISMATCH IN
SYSTEM FILES
NO DATABASE When disconnecting from the
computer, there are no tracks
FOUND
transferred to the player, or there is
lack of MODE information.
There are no tracks in the track list.
NO TRACK
SYSTEM There is a system error.
ERROR
<No. ***>
(Number
appears in
parenthesis.)
Corrective action
 Initialize the hard disk of the player
again (  page 37).
 Unlock the controls by sliding the
HOLD switch in the direction opposite
to that of the arrow (  page 19).
 Set "Audio Out" to "Headphone" ( 
page 30).
 Charge the battery (  page 8).
 The total number of items in the list
display (except track list) exceeds
8,192. Check the MODE and transfer
any unnecessary tracks back to your
computer (  page 34).
 Initialize the hard disk of the player
(  page 37) and transfer audio data to
the player again (  page 14).
 Transfer audio data to the player ( 
page 14).
 Go to a track list with tracks.
 Transfer audio data to the player ( 
page 14).
 Write down the number and consult
your nearest Sony dealer.
47
GB