Care And Cleaning - Kohler C3-520 Homeowner's Manual

6. Care and Cleaning

For best results, keep the following in mind when caring for your Kohler product:
IMPORTANT! Do not immerse product in water.
Test First - Always test your cleaning solution on an
inconspicuous area before applying it to the entire
surface.
Do Not Let Cleaners Soak - Do not allow cleaners to sit
or soak on the product.
Avoid Abrasive Materials - Use a soft, dampened
sponge or cloth. Never use an abrasive material such
as a brush or scouring pad to clean surfaces.
Wipe Clean - Wipe surfaces clean with a damp cloth
immediately after applying cleaners. Wipe away and dry
any overspray that lands on nearby surfaces.
NOTICE: Open cover or add water inside the toilet might
avoid the plastic parts yellowing problem caused by backflow
air from discharge pipe after residual toilet water evaporated
during long-term idle status.
Cleaning Your Seat
Avoid abrasive cleaners, detergents, disinfectants or
cleaning products in aerosol cans.
Care Tip: Clean the seat with a mixture of
dishwashing liquid and water, or any of the
products listed for toilet seats, using a damp
soft sponge or cloth. Dry with a soft towel and
let the seat air dry.
Do not allow abrasive chemicals and cosmetics (such as
fingernail polish and aftershave) to come in contact with
the toilet seat, as they can damage the finish.
NOTICE:
Failure to comply with these cleaning instructions
may void Kohler's warranty obligations.
NOTE: Success with cleaners and procedures is dependent upon such factors as
the hardness and temperature of the water, using exact quantities of ingredients,
changes in cleaning formulas, and the condition of the product being cleaned.
Since there are variations within these factors, Kohler cannot guarantee the
effectiveness of the formulas mentioned.
1350325-KR01-A 12 Kohler Co.