Receiving Calls; Operations During A Call - Sony DSX-S300BTX Operating Instructions Manual

Calling from the call history
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Press and hold
seconds.
A list of the call history appears.
3 Rotate the multi way encoder to select a name
and phone number from the call history, then
press it.
The phone call starts.
Note
You can call from the call history (up to 20).
Calling by direct phone number input
You can call by direct phone number input using
only the card remote commander.
1 Press (CALL) on the card remote commander
to select the Bluetooth Phone source.
2 Press the number buttons (0-9,
card remote commander to enter the phone
number.
3 Press (ENTER) on the card remote
commander.
The phone call starts.
To input "+," press and hold the 0 button on the
card remote commander.
Calling by preset number
You can store up to 6 contacts in the preset dial.
For details on how to store, see "Preset dial"
(page 36).
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Push the multi way encoder up/down to select
the contact you want to call, then press it.
The phone call starts.
To end a call
Press the multi way encoder again, or
(SOURCE/OFF).
Note
Even if the call is ended, the Bluetooth connection is
not canceled.
Calling by redial
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Press and hold the multi way encoder for 2 or
more seconds.
The phone call starts.
34
(BROWSE) for 2 or more
or ) on the

Receiving calls

When receiving a call, a ringtone is output from
your car speakers. The name and the phone
number appear in the display.
1
Press the multi way encoder when a
call is received with a ringtone.
The phone call starts.
Notes
• Only the phone number may appear, depending on
the cellular phone.
• The built-in microphone of this unit is located on the
rear of the front panel (page 15). Do not cover the
microphone with tape, etc.
Auto Answer setting
You can select an auto answer setting from "off,"
"Short" or "Long" (page 42).
Ringtone setting
You can switch the ringtone from "Default" or
"Cellular" (page 42).
* Depending on the cellular phone, this unit's ringtone
may be output even if set to "Cellular."
To reject a call
Press (SOURCE/OFF).

Operations during a call

Presetting the volume of the ringtone
and talker's voice
You can preset the volume level of the ring tone
and talker's voice.
To adjust the ringtone volume:
Rotate the multi way encoder while receiving a
call. "Ring Volume" appears and ringtone
volume can be adjusted.
To adjust the talker's voice volume:
Rotate the multi way encoder during a call. "Talk
Volume" appears and the talker's voice volume
can be adjusted.
Note
If the Bluetooth Phone source is selected, rotating the
multi way encoder will only adjust the talker's volume.
EC/NC Mode (Echo Canceller/Noise
Canceller Mode)
You can reduce echo and noise.
Push the multi way encoder left/right to set to
"EC/NC Mode 1" or "EC/NC Mode 2."
Note
Configurable during a call.