Sony DHC-MD373 Operating Instructions Manual page 5

3
Set the VOLTAGE SELECTOR on the
bottom of the system to the position of
your local power line voltage (for
models with a voltage selector).
220V
240V
VOLTAGE
SELECTOR
4
Connect the mains lead to a wall outlet.
If the plug of the mains lead does not fit your
wall outlet, attach the supplied adaptor on to
the plug (for models with a plug adaptor).
Inserting two R6 (size AA)
batteries into the remote
110V
120V
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes
• If you do not use the remote for a long period of
• Be sure to insert the batteries in correct direction.
• Do not mix new batteries with old ones.
• Do not use different types of batteries together.
• Do not use a battery that is leaking.
• If the battery leaks, clean the battery compartment
time, remove the batteries to avoid possible damage
from battery leakage.
and replace all the batteries with new ones.
e
E E
e
5