Sony DHC-MD373 Operating Instructions Manual page 20

Labelling a CD (continued)
2
Press NAME EDIT.
The text input screen appears, and the cursor
flashes.
3
Press CHARACTER to select the
desired type of character.
Each time you press the button, the display
changes as follows:
(Blank space) t A (Upper cases) t a
(Lower cases) t 0 (Numbers) t !
(Symbols) t
4
Press . or > repeatedly to select
the desired character.
To enter a black space
Press CURSORt without pressing . or
>. You cannot enter a space as the first
character.
To enter a symbol
You can use the following 24 symbols.
! " # $ % & ' ( )
5
Press CURSORt .
The character you selected in step 4 stops
flashing and the cursor shifts to the right.
20
Cursor
(Blank space) t ...
+ , – . / : ; < = > ? @ _ `
Cursor
6
Repeat steps 3 to 5 to complete the
entire title.
If you make a mistake
Press CURSORT or t until the character
you want to change flashes, then repeat steps
3 to 5.
To erase a character
Press CLEAR while the character is flashing.
You cannot insert characters.
7
Press ENTER/YES to complete the
labelling procedure.
The disc title is stored in the system memory
and then the original display appears.
To cancel labelling
Press MENU/NO.
Checking the disc titles
1 Press MENU/NO in stop mode.
2 Press . or > repeatedly until "Name
Check ?" appears, then press ENTER/YES.
3 Press . or > repeatedly to select the disc
titles stored in the system memory between 01
and 50.
To check the current disc title
Press SCROLL in stop mode.