Table of Contents
Advertisement
Network Camera User Manual
Set the fault tolerance, alarm list and check "alarm out". Finally, click "Save" to save all the
settings.
Allow fault character(s) of the plate number: up to 2 characters are allowed. For example, if
"2" is selected, the captured license plate will be matched successfully and trigger the
corresponding alarm even if there are 2 characters (or less) of the captured license plate not
matched with the license plate of the alarm list.
Alarm list: Select a list as the comparison list. Allow list, block list or unknown vehicle can be
optional.
Alarm out: if enabled, the system will trigger alarm output when the captured license plate is
matched successfully.
After all above information are set, go to the live interface and click
to see the captured
pictures as shown below.
When the captured license plate is matched with the license plate of the comparison list, the
list type will be displayed under the license plate number. Click the matched license plate
31
Advertisement
Table of Contents
