Roi Configuration - Motorola hellosecurity User Manual

Network Camera User Manual
To clear the video mask:
Click the "Clear" button to delete the current video mask area.

4.2.5 ROI Configuration

Go to ImageROI Config interface as shown below. An area in the image can be set as a
region of interest. This area will have a higher bitrate than the rest of the image, resulting in
better image quality for the identified area.
1. Check "Enable" and then click the "Draw Area" button.
2. Drag the mouse to set the ROI area.
3. Set the level.
4. Click the "Save" button to save the settings.
19