Network Camera Configuration; System Configuration; Basic Information; Date And Time - Motorola hellosecurity User Manual

Network Camera User Manual

4 Network Camera Configuration

In the Webcam client, choose "Config" to go to the configuration interface.
Note: Wherever applicable, click the "Save" button to save the settings.

4.1 System Configuration

4.1.1 Basic Information

In the "Basic Information" interface, the system information of the device is listed.
Some versions may support device ID and QR code. If P2P is enabled (see Network
Configuration-P2P), the network camera can be quickly added to mobile surveillance client,
by scanning the QR code or entering device ID.

4.1.2 Date and Time

Go to ConfigSystemDate and Time. Please refer to the following interface.
10