Mercedes-Benz S-Class 2013 Owner's Manual page 149

Memory function in the rear compartment
146
To select the rear seat: press the v
X
button repeatedly until the indicator lamp
in the button is not lit.
The rear-compartment seat is selected if
the indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 121).
Y
or
To select the front-passenger seat:
X
press the v button repeatedly until the
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
Adjust the front-passenger seat accord-
X
ingly ( page 122).
Y
Press the M memory button and then press
X
either the 1 or 2 memory button within
three seconds.
The settings are stored in the selected stor-
age position.
You cannot store any settings on the button
for setting the reclined position.
The memory positions in the area for the
chauffeur mode can only be set when the
conditions for the chauffeur mode are fulfilled
( page 125).
Y
Calling up a stored setting
Vehicles without rear reclining seat
Press and hold the relevant storage posi-
X
tion button 1, 2 or 3 until the rear seat or
the front-passenger seat are in the stored
position.
i
The seat adjustment procedure is inter-
rupted as soon as you release the storage
position button. The multicontour seat set-
ting or the 4-way lumbar support is still car-
ried out.
Vehicles with a rear reclining seat
Press and hold the relevant storage posi-
X
tion button 1 or 2 until the rear seat or the
front-passenger seat is in the stored posi-
tion.
i
The seat adjustment procedure is inter-
rupted as soon as you release the storage
position button. The multicontour seat set-
ting or the 4-way lumbar support is still car-
ried out.