Mercedes-Benz S-Class 2013 Owner's Manual page 134

To do so:
move the seat cushion of the rear seat as
R
far back as possible in a longitudinal direc-
tion ( page 121)
Y
move the front-passenger seat into posi-
R
tion for chauffeur mode (
remove the front-passenger seat head
R
restraint ( page 129)
Y
move the front-passenger seat so that the
R
backrest is in a fully reclined position
( page 120)
Y
Exiting
To exit the fully reclined position:
fold the backrest upright to a suitable posi-
R
tion
fit the head restraint (
R
Adjusting the head restraints
Adjusting the front head restraints
Important safety notes
G
WARNING
You could lose control of the vehicle while
driving if you:
adjust the driver's seat, steering wheel or
R
mirrors
fasten the seat belt
R
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirrors and fasten your seat
belt before starting the engine.
G
WARNING
The head restraints cannot provide the inten-
ded protection unless they are fitted and
adjusted correctly. There is an increased risk
of injury to the head and neck in the event of
an accident or sudden braking, for example.
Always drive with the head restraints fitted.
Ensure that the centre of the head restraints
support the back of each vehicle occupant's
head at eye level before driving off.
page 126)
Y
page 129).
Y
General notes
Pay attention to the important safety notes
( page 119).
Y
Do not interchange the head restraints of the
front and rear seats. Otherwise, you will not
be able to adjust the height and angle of the
head restraints to the correct position.
Adjusting the standard head restraint
mechanically
This function allows you to adjust the dis-
tance between the head restraint and the
back of the head.
To move forwards: pull the head restraint
X
forwards in the direction of the arrow until
it engages in the desired position.
To move backwards: press and hold
X
release button :.
Push the head restraint back.
X
Release the release button once the head
X
restraint is in the desired position.
Ensure that the head restraint has engaged
X
properly.
Seats
131
Z