Siemens Connect X200 Manual page 4

Activity
Product documentation
Related documents such as the environmental declarations, CE declarations, etc., can be
downloaded from the following Internet address:
https://siemens.com/bt/download
Notes
Safety
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Observe national provisions and comply with the appropriate safety regulations.
Mounting position and ambient temperature
The devices can be snapped onto standard rails or screwed onto a flat surface.
Plug-in screw terminals connect power and interfaces (except for Ethernet).
Ambient temperature -5...50 °C (23...122 °F)
●
Wall, horizontal
Risk of overheating for failure to comply with ambient temperature
Burning and damage to the device
●
Ensure sufficient ventilation to comply with the permissible ambient temperature within
the panel or installation box. The temperature must be at least 10 K (18° F) lower out-
side the installation box.
4
Siemens
Smart Infrastructure
LED / Interface Color
Service button
CAUTION
– From left to right
– From right to left
CAUTION
Activity Function
Long press, up to Factory reset
20s (power off device All configuration data and installed apps are
first) deleted
If RUN LED is constantly green, factory
reset was successful
Short press IP address 169.254.169.254 will be
assigned to LAN port for the duration of 15
min.
Ambient temperature -5...45 °C (23...113 °F)
●
Overhead
●
Wall, vertically
– From top to bottom
– From bottom to top
●
On a horizontal surface
A6V11974867_en--_b
2021-08-30