Printing Does Not Start - Canon S 300 User Manual

Printing Does Not Start

■ Ensure that the printer is turned on.
If the POWER lamp is off, press the POWER button.
If the POWER lamp is flashing green, the printer is initializing. Wait until the POWER
lamp stops flashing.
➤
Note
When printing a large amount of data, such as a photograph or illustration,
the printer may take longer than usual to begin printing. While the POWER
lamp is flashing, the computer is processing the data and sending it to the
printer. Wait until the green lamp stops flashing and printing begins.
■ Ensure that the printer is securely connected to the computer.
➤
Note
If you are using a switch box or other device, remove and reconnect the
printer directly to the computer. Try printing again.
If printing is successful, there may be a problem with the device. Also, there
could be a problem with the cable(s). Replace the cable(s) and try printing
again.
Printer Does Not Start or Stops During Print Jobs
Troubleshooting
138