Table of Contents
Advertisement
User Guide
Connecting a printer
To connect a printer, you can use either the printer port (shown in the
top picture) or a USB port (bottom picture), depending on the cable
you use for your printer.
Please see your printer's documentation for details on connection and
installation.
Always check the printer manufacturer's website for the latest drivers
for your operating system. Some printers do not function properly
without updated drivers.
USB printer drivers should be automatically installed. Once you plug
the printer's USB cable into one of the USB ports on your computer,
the Found New Hardware Wizard will guide you through any setup
procedure you need to follow.
If the printer is not automatically installed, you can try the following:
1
From the Control Panel, select Printers and Other Hardware,
then Printers and Faxes.
2
Under Printer Tasks, click Add a printer.
3
Let the Add Printer Wizard guide you through the installation
process.
4
Click Finish.
The printer is now installed.
✍
This procedure applies for most, but not for all printers.
Picture may vary from actual configuration.
n N
50
Connecting peripheral devices
Advertisement
Table of Contents
