Using The Remote Commander - Sony VGC-RC204 User Manual

User Guide

Using the Remote Commander

This section describes the basic functions of the remote commander.
Start MY TV, MY MUSIC, MY PICTURES, MY VIDEOS in Media
Center. Press STANDBY to place your computer in Standby mode.
Control the playback for TV, MUSIC, VIDEOS, and end a side
show. Buttons include: STOP, PAUSE, FWD, SKIP, REPLAY,
REW, and RECORD. The right arrow button serves as a PLAY
button.
Use the arrow buttons to move to a specific location, the OK
button to make your selection, the BACK button to go to the
previous screen, and the MORE button to view additional
information.
Use the START button to open Media Center. Volume Controls
(VOL) are on the left and Channel (CH) or Page (PG) on the right of
the START button. A MUTE button is also provided to suppress
sound.
Important Note: The VAIO
sound for your TV. You must use the remote control that you are
currently using to control the sound for your TV.
Open the following screens RECORDED TV, GUIDE, LIVE TV,
DVD MENU. (DVD MENU is available only when Media Center is
active.)
Use these buttons to change channels and enter text or numbers
in a specific location.
®
remote control will NOT control the
Using your VAIO computer
E
n N
18