Table of Contents
Advertisement
Network Media Receiver
The Network Media Receiver does not turn off
If the displayed screen is frozen or unresponsive, or you cannot turn the Network Media Receiver off, the unit may have become
unstable.
To reset the unit, proceed as follows:
1
Press the power button on the Network Media Receiver for more than five seconds or disconnect the AC adapter from the
Network Media Receiver.
2
Wait 20 seconds for the Standby indicator to light in red, then turn the Network Media Receiver unit on.
Resetting the Network Media Receiver or reconnecting the AC adapter resets the unit's settings to the original factory default
settings.
3
To completely disconnect power to the Network Media Receiver, unplug the AC adapter.
The Network Media Receiver goes into Standby mode and the Standby indicator light is red (dimmed).
n N
73
Troubleshooting
Advertisement
Table of Contents
