Network Media Receiver
Environment 3: DSL/cable modem without a built-in router
Read the notes on
page
22, then proceed as follows:
1
Connect the Network Media Receiver to a router device with a network switch* (1), using the network cable (2).
2
Connect the Ethernet jack on each VAIO computer to the jack(s) on the router device, using additional network cables* (3).
3
Connect the WAN jack on the router device, to the LAN jack on the DSL or cable modem, using a network cable* (4).
* Sold separately.
MONITOR
USB
MIC
HEADPHONES
LINE IN
MONITOR
AUDIO
S VIDEO/VIDEO
AUDIO
S VIDEO/VIDEO
VHF/UHF
– VIDEO OUTPUT –
– VIDEO1 INPUT –
PHONE
LINE
Internet
LAN
LINE
WAN
LAN
n N
25
Setting up the hardware