PRODUCT REGISTRATION Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!* * No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Component Checklist IMPORTANT: Ensure you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit tripplite.com/support for service. (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x3) (x1) 115x52 mm Antimicrobial...
Page 4
Assembly Base Assembly and Desk Installation Edge Installation Hole Installation 10-40 mm 0.4-1.6 in. O 10 mm O 0.375 in. 49 mm 1.9 in. 10-84 mm 0.4-3.3 in. 40-84 mm 1.6-3.3 in.
Page 5
Assembly Attaching the Arm to the Base Attaching the Center Mounting Bracket to the Arm...
Page 6
Assembly Attaching the Handle Attaching the Left and Right Mounting Brackets...
Page 7
Assembly Attaching the Universal Plates to the Mounting Brackets Do not over-tighten screws. Too Long Too Short Use an assistant or mechanical lifting equipment when attaching the universal plate to the mounting bracket.
Page 8
Assembly Balancing the Arm To properly balance the arm with monitors mounted, adjust the spring tension using the supplied hex key as follows: First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require it. If the arm drops, turn the adjustment screw counter- clockwise until it stays in a horizontal position.
Page 9
Assembly Securing the Cable Management Covers...
Page 10
Assembly Adjustment and Applying the Antimicrobial Tape Note: If the display does not stop at your desired position, tighten the screws as shown.
Assembly Maintenance • Check that the bracket is secure and safe to use at regular intervals (at least every three months). • Please visit tripplite.com/support if you have any questions. 1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support 21-04-290 •...
Tripp Lite tiene una política de mejora continua. Las especificaciones están sujetas a cambio sin previo aviso. Las fotografías e ilustraciones pueden diferir...
Page 14
Accesorios y Partes Incluidas en el Empaque IMPORTANTE: Antes de proceder a instalar, asegúrese de haber recibido todas las partes de acuerdo con la lista de comprobación de componentes. Si faltase alguna parte o estuviese dañada, visite tripplite.com/support para solicitar servicio. (x1) (x1) (x1)
Page 15
Ensamble Ensamble de Base e Instalación en Escritorio Instalación en el Borde Instalación en Orificio 10 a 40 mm 0.4" a 1.6" O 10 mm O 0.375" 49 mm 1.9" 10 a 84 mm 0.4" a 3.3" 40 a 84 mm 1.6"...
Page 16
Ensamble Colocación del Brazo en la Base Colocación del Soporte de Instalación Central en el Brazo...
Page 17
Ensamble Colocación de la Manija Colocación de los Soportes de Instalación Izquierdo y Derecho...
Page 18
Ensamble Colocación de las Placas Universales en los Soportes de Instalación No apriete excesivamente los tornillos. Demasiado Demasiado Grande corto PARTE SUPERIOR Trabaje con un ayudante o con equipo de elevación mecánico al colocar la placa universal en el soporte de instalación.
Page 19
Ensamble Balanceo del Brazo Para balancear correctamente el brazo con los monitores instalados, ajuste de la siguiente manera la tensión del resorte usando la llave hexagonal suministrada: Primero, coloque y sostenga firmemente el brazo horizontalmente como se muestra. Solicite ayuda en caso de que la necesite.
Page 20
Ensamble Fijación de las Cubiertas para Administración de Cables...
Page 21
Ensamble Ajuste y Aplicación de la Cinta Antimicrobiana Nota: Si la pantalla no se detiene en su posición deseada, apriete los tornillos como se muestra.
Ensamble Mantenimiento • Compruebe a intervalos regulares (al menos trimestralmente) que el soporte esté bien instalado y sea seguro para usarse. • Si tiene alguna pregunta, visite por favor tripplite.com/support. MÁS DE AÑOS 1111 W. 35th Street, Chicago, IL 60609, EE. UU. • tripplite.com/support 21-04-290 •...
Puisque les utilisations individuelles sont sujettes à des variations importantes, le fabricant ne fait aucune déclaration ou garantie quant à l'aptitude ou l'adaptation de ces dispositifs pour une application spécifique. La politique de Tripp Lite en est une d'amélioration continue. Les caractéristiques techniques sont modifiables sans préavis. Les produits réels peuvent différer légèrement des photos et des illustrations.
Page 25
Liste de vérification des composants IMPORTANT : S'assurer d'avoir reçu toutes les pièces conformément à la liste de vérification des composants avant de procéder à l'installation. Si des pièces sont manquantes ou défectueuses, visiter tripplite.com/support pour obtenir de l'aide. (x1) (x1) (x1) (x1)
Page 26
Assemblage Assemblage de la base et installation du bureau Installation avec un Installation sur le rebord trou 10 à 40 mm 0,4 à 1,6 po O 10 mm O 0,375 po 49 mm 1,9 po 10 à 84 mm 0,4 à 3,3 po 40 à...
Page 27
Assemblage Fixation du bras à la base Fixation du support de montage central au bras...
Page 28
Assemblage Fixation de la poignée Fixation des supports de montage gauche et droite...
Page 29
Assemblage Fixation des plaques universelles aux supports de montage Ne pas trop serrer les vis. Trop long Trop court DESSUS Faire appel à un assistant ou utiliser de l'équipement de levage mécanique pour fixer la plaque universelle au support de montage.
Page 30
Assemblage Équilibrage du bras Pour bien équilibrer le bras avec les moniteurs montés, ajuster la tension du ressort en utilisant la clé hexagonale fournie comme suit : Dans un premier temps, positionner le bras sur le plan horizontal, puis le maintenir fermement en place comme illustré.
Page 31
Assemblage Fixation des couvercles de gestion des câbles...
Page 32
Assemblage Ajustement et application du ruban antimicrobien Remarque : Si l'écran ne s'arrête pas à la position souhaitée, serrer les vis comme illustré.
Assemblage Entretien • Vérifier à intervalles réguliers que le support peut être utilisé de façon sûre et sécuritaire (au moins tous les trois mois). • Pour toute question, visiter tripplite.com/support. 1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support 21-04-290 •...
с большим разнообразием конкретных применений производитель не дает каких-либо заверений или гарантий относительно пригодности данных изделий для какого-либо конкретного применения или их соответствия каким-либо конкретным требованиям. Компания Tripp Lite постоянно совершенствует свою продукцию. B связи с этим возможно изменение технических характеристик без предварительного уведомления. Внешний вид реальных изделий может несколько отличаться от представленного на фотографиях и иллюстрациях.
Page 36
Перечень комплектации ВНИМАНИЕ! Перед началом установки убедитесь в наличии всех деталей согласно перечню комплектации. В случае отсутствия или повреждения каких- либо деталей обратитесь за помощью на страницу tripplite.com/support. 1 шт. 1 шт. 1 шт. 1 шт. 1 шт. 1 шт. 1 шт.
Page 37
Порядок сборки Сборка основания и установка на столе Установка с креплением к краю Установка в отверстие стола 10-40 мм O 10 мм 49 мм ИЛИ 10-84 мм 40-84 мм...
Page 38
Порядок сборки Крепление рычага к основанию Крепление центрального монтажного кронштейна к рычагу...
Page 39
Порядок сборки Крепление рукоятки Крепление левого и правого монтажных кронштейнов...
Page 40
Порядок сборки Крепление универсальных пластин к монтажным кронштейнам Не перетягивайте винты. Слишком Слишком длинный короткий ВЕРХ Обратившись за помощью или воспользовавшись механическим подъемным оборудованием, прикрепите универсальную пластину к монтажному кронштейну.
Page 41
Порядок сборки Балансировка рычага Для надлежащего уравновешивания рычага с установленными мониторами отрегулируйте натяжение пружины с помощью поставляемого в комплекте торцевого ключа следующим образом: Сначала установите и плотно удерживайте рычаг в горизонтальном положении, как показано на рисунке. При необходимости обратитесь за помощью. Для...
Page 42
Порядок сборки Крепление защитных кабельных каналов...
Page 43
Порядок сборки Регулировка и наклеивание противомикробной ленты Примечание. Если дисплей не останавливается в нужном положении, затяните винты, как показано на рисунке.
Page 44
Порядок сборки Техническое обслуживание • Регулярно (не реже, чем раз в три месяца) проверяйте надежность крепления кронштейна и безопасность его использования. • В случае возникновения каких-либо вопросов посетите страницу tripplite.com/support. 1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support 21-04-290 •...
Page 46
Einsatz sicher ist. Da die Anwendungen variieren können, übernimmt der Hersteller keine Garantie bezüglich der Eignung dieser Geräte für einen bestimmten Verwendungszweck. Tripp Lite hat den Grundsatz, sich kontinuierlich zu verbessern. Spezifikationen können ohne Ankündigung geändert werden. Fotos und Illustrationen können von den tatsächlichen Produkten leicht abweichen.
Page 47
Komponentenliste WICHTIG: Überprüfen Sie, ob Sie alle in der Komponentenliste aufgeführten Teile erhalten haben, bevor Sie mit der Installation beginnen. Wenn Teile fehlen oder fehlerhaft sind, besuchen Sie tripplite.com/support für den Kundendienst. (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1) (x1)
Montage Sockelmontage und Tischinstallation Kanteninstallation Lochmontage 10 bis 40 mm 0,4 bis 1,6 Zoll O 10 mm O 0,375 Zoll 49 mm 1,9 Zoll ODER 10 bis 84 mm 0,4 bis 3,3 Zoll 40 bis 84 mm 1,6 bis 3,3 Zoll...
Page 49
Montage Befestigen des Arms am Sockel Befestigen der mittleren Montagehalterung am Arm...
Page 50
Montage Anbringen des Griffs Anbringen der linken und rechten Montagehalterungen...
Page 51
Montage Befestigen der Universalplatten an den Montagehalterungen Ziehen Sie die Schrauben nicht zu fest an. Zu lang Zu kurz OBEN Um die Universalplatte an der Montagehalterung zu befestigen, werden zwei Personen oder eine mechanische Hebevorrichtung benötigt.
Page 52
Montage Ausgleichen des Arms Um den Arm richtig mit den montierten Monitoren auszubalancieren, passen Sie die Federspannung mit dem im Lieferumfang enthaltenen Sechskantschlüssel wie folgt an: Positionieren und halten Sie den Arm zunächst horizontal, wie gezeigt. Bitten Sie jemanden um Hilfe, falls Sie Unterstützung benötigen.
Page 53
Montage Befestigen der Kabelmanagement-Abdeckungen...
Page 54
Montage Anpassen und Anbringen des antimikrobiellen Klebebands Hinweis: Wenn der Bildschirm nicht an der gewünschten Position anhält, ziehen Sie die Schrauben wie gezeigt fest.
Page 55
Montage Wartung • Stellen Sie in regelmäßigen Abständen (mindestens alle drei Monate) sicher, dass die Wandhalterung sicher angebracht ist. • Wenn Sie Fragen haben, besuchen Sie bitte tripplite.com/support. 1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support 21-04-290 • 93-3E81_RevA...