Table of Contents
Advertisement
Getting help
4
Use the arrow keys to select the Exit menu.
5
Press <F9> or use the arrow keys to select Get Default Values. The message Load default
configuration now? appears.
6
Make sure that Yes is selected and then press <Enter>.
7
Press <F10> to exit, or use the arrow keys to select Exit (Save Changes).
The message Save configuration changes and exit now? appears.
8
Make sure that Yes is selected and then press <Enter>.
My computer does not shut down
It is recommended that you shut down your computer using the Turn Off Computer command on the
Windows
If the Turn Off Computer command does not work properly, proceed as follows:
1
Shut down the computer by pressing <Alt>+<F4>. The Turn off computer box appears. Select Turn Off.
2
If this does not work, press <Ctrl>+<Alt>+<Delete>. The Windows Task Manager dialog box appears.
Click Shut Down, then Turn off.
3
If this does not work, press the power button and hold it for at least four seconds.
This turns off the power.
4
Unplug the computer from the mains.
My system is running slowly
The system response time varies, depending on the number of applications that are open and running.
Close any application that you are not currently using.
Increasing the system memory may also help. The computer has two memory slots. For memory
upgrades, use only PC-800 Direct Rambus RIMM modules in pairs. For information on installing memory,
please see the section Installing a new memory module
®
Start menu. Using other methods, including those listed here, may result in loss of unsaved data.
(page
71).
n N
54
Advertisement
Table of Contents
