Fujitsu MB95200H Series Operation Manual page 5

The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU MICROELECTRONICS LIMITED sales representatives
before ordering.
The information, such as descriptions of function and application circuit examples, in this document are
presented solely for the purpose of reference to show examples of operations and uses of FUJITSU
MICROELECTRONICS LIMITED semiconductor device; FUJITSU MICROELECTRONICS LIMITED does
not warrant proper operation of the device with respect to use based on such information. When you
develop equipment incorporating the device based on such information, you must assume any
responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS LIMITED
assumes no liability for any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be
construed as license of the use or exercise of any intellectual property right, such as patent right or
copyright, or any other right of FUJITSU MICROELECTRONICS LIMITED or any third party or does
FUJITSU MICROELECTRONICS LIMITED warrant non-infringement of any third-party's intellectual
property right or other right by using such information. FUJITSU MICROELECTRONICS LIMITED
assumes no liability for any infringement of the intellectual property rights or other rights of third parties
which would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for
general use, including without limitation, ordinary industrial use, general office use, personal use, and
household use, but are not designed, developed and manufactured as contemplated (1) for use
accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious
effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss
(i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport
control, medical life support system, missile launch control in weapon system), or (2) for use requiring
extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU MICROELECTRONICS LIMITED will not be liable against you and/or any third
party for any claims or damages arising in connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or
loss from such failures by incorporating safety design measures into your facility and equipment such as
redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or technologies subject to certain restrictions
on export under the Foreign Exchange and Foreign Trade Law of Japan, the prior authorization by
Japanese government will be required for export of those products from Japan.
© 2008 FUJITSU MICROELECTRONICS LIMITED
BGM Adaptor MB2146-08-E Operation Manual V1.1
PREFACE
iii