Clean Steel; Lk;Lkm;Lkm;/ Kick Panel - GE ETS19 P Series Technical Service Manual

Table of Contents

Advertisement

https://appliancetechmanuals.com
Kick Panel
The kick panel on models with no-freezer light is
replaceable.
Note: The kick panel on models with a freezer
light is replaceable, but not currently cataloged.
Removal and Replacement
Note: This procedure should be performed by two
people.
1. Unplug the refrigerator to disconnect power.
2. Remove shelving from the refrigerator and
freezer.
3. Lay the refrigerator on it's back.
4. Remove the 2 hinge screws, hinge, and fresh
food door from the refrigerator.
5. Remove the top screw from the same side.
6. Remove the 3 screws from the opposite side
of the kick panel.
Kick Panel
Note: If necessary, adjust the mobility screw to
remove the mobility assembly in steps 7 and 8.
6. Reverse the above procedure to reinstall.
Top Screw
Hinge Screws
– 10 –
7. Remove the 3 screws and right mobility
assembly.
8. Remove the 3 screws and left mobility
assembly.
Level Adjustment Screw
Screw
Mobility Assembly
9. Slide out and remove the kick panel.
Note: When installing the kick panel screws, use
of an electric screwdriver will aid in the
installation.

Clean Steel™

Clean Steel™ is a vinyl-laminated steel similar in
appearance to true stainless steel. Clean Steel™
is easier to clean than stainless steel and does
not show fingerprints. The material has better
scratch resistance and has a galvanized steel
substrate to prevent red rust should a scratch
occur. Doors are shipped with a protective
polyethylene coating to help eliminate/reduce any
damage in shipping and delivery to the customer.
A touch-up paint is being developed for noncritical
areas, but there is currently no appearance repair
method for the front face of the door.
A Clean Steel™ surface is cleaned the same way
as our current painted surfaces. Use a clean
cloth lightly dampened with appliance polish or
mild household detergent. Then, use another
clean cloth to dry and polish the cleaned surfaces.
Caution: On all painted appliance surfaces, do
not use a kitchen towel that has been previously
used for kitchen cleaning without first being
washed. Bacteria from the previously used towel
will be deposited on the surface of the appliance
and will deteriorate the finish.
Screw
Screw

Advertisement

Table of Contents
loading

Table of Contents