Honda CRF230F 2017 Owner's Manual page 97

18
3. To position the front brake lever (3) farther away
from the handgrip, turn the adjuster (4) clockwise.
To position the front brake lever closer to the
handgrip, turn the adjuster counterclockwise.
4. Tighten the lock nut. Return the dust cover to its
normal position.
5. Apply the brake, release it, then spin the wheel
and check that it rotates freely. Repeat this
procedure several times.
6. Check free play by pulling in slowly on the front
brake lever until the brake starts to engage.
Free play:
10 – 20 mm (0.4 – 0.8 in)
If brake lever free play is not within this range, see
your Honda dealer.
(1)
(2) (4)
(1) Rubber dust cover
(3)
(2) Lock nut
(3) Front brake lever
(4) Adjuster
Other checks
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
Rear Brake
Pedal height adjustment
1. Place the motorcycle on its side stand.
2. The stopper bolt (1) is provided to allow
adjustment of the pedal height.
To adjust the pedal height, loosen the lock nut (2)
and turn the stopper bolt. Tighten the lock nut.
(1)
(2)
CRF230F
(1) Stopper bolt
(3)
(2) Lock nut
(3) Rear brake pedal