Honda CRF230F 2017 Owner's Manual page 151

72
Washing the Motorcycle
1. Rinse the motorcycle thoroughly with cool water
to remove loose dirt.
2. Clean the motorcycle with a sponge or soft cloth
using cool water.
Avoid directing water to muffler outlets and
electrical parts.
3. Clean the plastic parts using a cloth or sponge
dampened with a solution of mild detergent
and water. Rub the soiled area gently rinsing it
frequently with fresh water. Take care to keep
brake fluid or chemical solvents off the motorcycle.
They will damage the plastic and painted surfaces.
4. After cleaning, rinse the motorcycle thoroughly
with plenty of clean water. Strong detergent
residue can corrode alloy parts.
5. Dry the motorcycle, start the engine, and let it run
for several minutes.
6. Test the brakes before riding the motorcycle.
Several applications may be necessary to restore
normal braking performance.
7. Lubricate the drive chain immediately after
washing and drying the motorcycle.
Braking efficiency may be temporarily impaired
immediately after washing the motorcycle. Anticipate
longer stopping distance to avoid a possible accident.
Finishing Touches
After washing your motorcycle, consider using a
commercially-available spray cleaner/polish or
quality liquid or paste wax to finish the job. Use only
a non-abrasive polish or wax made specifically for
motorcycles or automobiles. Apply the polish or wax
according to the instructions on the container.
Exhaust Pipe and Muffler Maintenance
When the exhaust pipe and muffler are painted, do
not use a commercially available abrasive kitchen
cleaning compound. Use a neutral detergent to clean
the painted surface on the exhaust pipe and muffler.
If you are not sure if your exhaust pipe and muffler
are painted, contact your dealer.
CRF230F