Reverb Function; Setting The Reverb Function; Reverb Pre-Set List; Setting The Xri Information Recording Function - Tascam DR-22WL Reference Manual

7– Useful functions

Reverb function

This unit has a built-in reverb that can be applied to the input
sound or the output sound.
When reverb function is ON, the
of the home screen.

Setting the reverb function

/MENU/8 button to display the menu screen.
1. Press the
2. Use the F1
button to display the TOOL page.
3. Use the F2 and F3
parameter in REVERB item and press the F4
The REVERB screen is displayed.
NOTE
You can set and adjust reverb in record standby mode as
well, from the REVERB page of the input setting screen.
4. The following settings are made in the REVERB screen.
REVERB:
Set the reverb on/off status (default value: OFF).
TYPE:
See the reverb type from the pre-set items. See page 32
for more details on reverb pre-set items.
LEVEL:
Adjust the reverb output level. Settings can be selected
from 0 - 100. (default value: 70)
MODE:
Set the reverb mode.
MODE (options) Icon Detail
MONITOR
(default value)
REC
5. Use the F2 and the F3
the setting parameter and press the F4
6. Use the F2 and F3
value.
7. Press the F4
button to finalize the setting and return to
the item setting item status.
8. Repeat the 4.-7. steps as necessary.
9. When setting is completed, press the
32
TASCAM DR-22WL
icon will appear at the top
buttons to select (highlight) the
button.
You can add reverb to the output
sound.
This does not affect the sound
recorded.
You can add reverb to the input
sound.
You can record sound with
reverb added.
buttons to select (highlight)
button.
buttons to set the desired option/
/MENU/8 button.
CAUTION
Reverb function will not work (but able to make settings)
when the setting or the selected playback file's sampling
rate is 96kHz.
NOTE
The reverb function on/off setting is available also in
recording standby mode; press F4
setting in the REVERB page of the input setting screen.

Reverb pre-set list

Pre-set name Effect
HALL 1 (default value) A bright effect, like a spacious hall
A warm effect, like a spacious hall
HALL 2
Small room effect
ROOM
Studio effect
STUDIO
Bright plate reverb
PLATE 1
Warm plate reverb
PLATE 2
Setting the XRI information recording
function
When recording in the BWF file format, the unit can also record
XRI information (eXtended Recording Information), which
includes the input volume and other recording settings.
/MENU/8 button to open the menu screen.
1. Press the
2. Press the F1
button to open the TOOL page.
3. Use the F2 and F3 buttons to select XRI MODE, and
press the F4 button.
The XRI MODE options will be shown.
4. Use the F2 and F3
buttons to set the XRI information
recording mode.
Options:
OFF: XRI information not recorded
ON (default): Record XRI information
ON+GPS: Record XRI and GPS information
5. Press the F4
button to confirm the setting.
6. When finished, press the
the Home Screen.
CAUTION
GPS information is acquired from the dedicated app (DR
CONTROL). This information cannot be acquired when using
the unit without the app. Information acquired is as follows.
LATITUDE: Latitude data
LONGITUDE: Longitude data
button and make
/MENU/8 button to return to