Connecting The Player To Your Computer / Charging The Battery; File Transfer - Oregon Scientific MP 120 User Manual

CONNECTING THE PLAYER TO YOUR COMPUTER /
CHARGING THE BATTERY
To connect the player to your computer using the supplied USB cable:
NOTE: Make sure you turn off the player before connecting to the PC.
Once connected the player's built-in battery will automatically begin
charging. "READY" will show on the LCD.
When the battery is fully charged after approximately 2-3 hours on a
continuous charge, the battery icon shows
the player when charging is finished unless you are transferring files.
The battery status indicators are as follows:
NOTE: When the low battery indicator shows
as soon as possible. When the battery icon shows
the battery is about to run out of power within a few seconds minutes.
NOTE: Charging time may vary depending on the computer's USB
usage status.
TIP: You can charge your player with a USB adaptor (optional
accessory). AC cable and plugs differ from region to region.

FILE TRANSFER

After connecting your MP3 player to the computer, the computer will
detect and identify the device as a removable storage drive, allowing
you to drag and drop all forms of data files between your computer
and your player.
MP120 EngManl R4(V1.1) OP
All manuals and user guides at all-guides.com
Low Medium
5
¶´ƒ
PC USB
. Please disconnect
Full
, recharge the battery
, this indicates
5
11/4/04, 5:40 PM