Windows 98 Driver Installation (For Win 98Se Users Only); Connecting The Player To Your Computer / Charging The Battery - Oregon Scientific MP 100 User Manual

WINDOWS 98 DRIVER INSTALLATION
(FOR WIN 98SE USERS ONLY)
Windows ME, 2000, XP Users
When you connect your MP3 player to your PC, it will appear as a
removable drive. (i.e., Removable Disk (H:))
Windows 98SE Users
Installing the MP100 driver software will allow your computer to
recognize your MP3 player each time it is connected to the computer.
1. Insert the MP100 CD-ROM into your computer. If the installer
2. Follow the onscreen instructions.
3. Restart your computer.
MACINTOSH OS 9.0 or above
When you connect your MP3 player to your Macintosh, it will appear
as one drive icon on the desktop (i.e., Untitled).
CONNECTING THE PLAYER TO YOUR COMPUTER /
CHARGING THE BATTERY
To connect your player to your computer:
Before using your player for the first time, you should first charge the
battery by connecting your player to the computer using the supplied
USB cable. " READY" will show on your player's LCD screen when a
successful connection has been made.
NOTE: Charging only begins after the computer has been turned on.
MP100 EngManl r5(V1.1) OP
does not automatically begin, please refer to the troubleshooting
section for help.
3
¶´ƒ
3
10/28/04, 10:33 AM