Table of Contents
Advertisement
57413
8/16/03
11:50 PM
MAIN MENU Overview
MAIN MENU Screen (#1)
This screen provides access to all programming functions. Although MAIN MENU options may be
accessed in any order, the controller anticipates that they will be completed sequentially and
highlights the next option in the menu each time the screen is re-entered.
The sensor must be in RUN mode to operate. When programming is complete, select
NOTE:
on the MAIN MENU screen or press
RUN mode.
QUICK START
Provides a simple way to program and run the sensor if advanced features are not required (see
page 10).
SETUP
Adjust where the image appears within the array, focus the lens, and lighten or darken the image
(see page 11).
ROI
Define a Region of Interest (ROI) to include in judgments or mask an area to exclude (see page
12).
TEACH
Set and edit judgment criteria (see page 18).
RUN
Put the sensor into RUN mode and display the RUN screen. The RUN screen provides access to
all monitoring functions (see page 21).
CONFIGURE
Set application type, pixel color to count, lighting options, and trigger/output options. Upload or
download a configuration file (see page 26).
Banner Engineering Corp. • Minneapolis, MN
www.bannerengineering.com • Tel: 763.544.3164
Page 9
RUN MAIN
,
RUN P/F
, or
RUN JUDGE
U.S.A.
RUN
to put the sensor into
MAIN MENU (#1)
OVERVIEW
MAIN MENU
QUICK START
SETUP
ROI
TEACH
RUN
CONFIGURE
MAIN MENU Screen (#1)
QUICK START
SETUP (#2)
SETUP
SETUP (#2)
ROI
DRAW (#3)
TEACH
TEACH (#4)
RUN
RUN (#5)
CONFIGURE
CONFIGURE (#6)
P/N 57413
9
Advertisement
Table of Contents
