Chipset Features Setup - MSI J-TX98 R2 Manual


Security Option: This category allows you to limit access to the system and
Setup, or just to Setup. The default value is Setup.
System: The system will not boot and access to Setup utility if the correct
password is not entered at the prompt.
Setup: The system will boot, but access to Setup utility if the incorrect
password is entered at the prompt.
NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you
will be asked to enter password. Do not type anything and just press <Enter>,
it will disable security. Once the security is disabled, the system will boot and
you can enter Setup freely.

PCI/VGA Palette Snoop: Some display cards that are non-standard VGA
such as graphics accelerators or MPEG Video Cards may not show colors
properly. The setting Enabled should correct this problem. Otherwise leave
this on the setup default setting of Disabled.

OS Select For DRAM > 64MB: When using OS2 operating systems with
installed DRAM of greater than 64MB, you need to OS2 this option otherwise
leave this on the setup default of Non-OS2.

Video BIOS Shadow: It determines whether video BIOS will be copied to
RAM, however, it is optional from chipset design. Video Shadow will increase
the video speed.
Enabled: Video shadow is enabled
Disabled: Video shadow is disabled
 C8000 - CBFFF
CC000 - CFFFF Shadow:
D0000 - D3FFF Shadow:
D4000 - D7FFF Shadow:
D8000 - DBFFF Shadow:
DC000 - DFFFF Shadow:
These categories determine whether optional ROM will be copied to RAM by
16K byte or 32K byte per/unit and the size depends on chipset.
Enabled: Optional shadow is enabled.
Disabled: Optional shadow is disabled.

3-3 CHIPSET FEATURES SETUP

Choose the "CHIPSET FEATURES SETUP" in the CMOS SETUP UTILITY
menu to display following menu.
Shadow:
23