Load Bios Defaults - MSI J-TX98 R2 Manual

Resources Controlled By : Manual
Reset Configuration Data: Disabled
IRQ-3 assigned to : Legacy ISA
IRQ-4 assigned to : Legacy ISA
IRQ-5 assigned to : PCI/ISA PnP
IRQ-7 assigned to : Legacy ISA
IRQ-9 assigned to : PCI/ISA PnP
IRQ-10 assigned to : PCI/ISA PnP
IRQ-11 assigned to : PCI/ISA PnP
IRQ-12 assigned to : PCI/ISA PnP
IRQ-14 assigned to : Legacy ISA
IRQ-15 assigned to : Legacy ISA
DMA-0 assigned to : PCI/ISA PnP
DMA-1 assigned to : PCI/ISA PnP
DMA-3 assigned to : PCI/ISA PnP
DMA-5 assigned to : PCI/ISA PnP
DMA-6 assigned to : PCI/ISA PnP
DMA-7 assigned to : PCI/ISA PnP
IRQxx assigned to
These fields indicate whether or not the displayed IRQ for each field is being used
by a Legacy (non-PnP) ISA card. Two options are available: "PCI/ISA PnP" and
"Legacy ISA". The first option the default value, indicates either that the displayed
IRQ is not used or an PCI/ISA PnP is being used to determine if an ISA card is
using that IRQ. Second option is for Legacy ISA card that requires a unique IRQ,
and you are not using an PCI/ISA PnP, you must set the field for that IRQ to
Legacy ISA.
For example: If you install a Legacy ISA card that requires IRQ10 lets say, then
set "IRQ10 assigned to Legacy ISA".
DMAxx assigned to
These fields indicate whether or not the displayed DMA channel for each field is
being used by a Legacy (non-PnP) ISA card. Available options include: "PCI/ISA
PnP" and "Legacy ISA". When is option "PCI/ISA PnP" indicates either that the
displayed DMA channel is not used or an PCI/ISA PnP being used to determine if
an ISA card is using that channel. If you install a Legacy ISA card that requires a
unique DMA channel, and you are not using an PCI/ISA PnP, you must set the
field for that channel to "Legacy ISA".

3-6 LOAD BIOS DEFAULTS

The "LOAD BIOS DEFAULTS" function loads the system default data directly
from ROM and initialize associated hardware properly. This function will be
necessary only when the system CMOS data is corrupted.
AWARD SOFTWARE, INC.
PCI IRQ Actived By : Level
PCI IDE 2nd Channel : Enabled
PCI IDE IRQ Map To : PCI-AUTO
Primary IDE INT# : A
Secondary IDE INT# : B
Esc: Quit
F1 : Help
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3-6
29
↑↓→←: Select Item
Pu/Pd/+/-:Modify