Safety Systems; Overview - Bosch MUMVC CN Series Instruction Manual

Safety systems

Start lock-out
See "Operating positions" table.
The appliance can be switched on in
pos. 1 and 3 only:
■ when the bowl (11) has been inserted and
turned until it locks into place.
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power is
restored. To switch the appliance on again,
turn the rotary switch to 0, then switch on.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated.
A possible cause may be that too much
food was processed at one time.
If a safety system is activated, see
"Troubleshooting".
The appliance requires no maintenance.
These operating instructions refer to various
models. An overview of the different models
can be found on the illustrated pages.
(Fig. M)

Overview

Fig. A:
Base unit
1 Release button
2 Swivel arm
"Easy Armlift" function to support the
upward movement of the arm (see
"Work positions").
3 Rotary switch
When the appliance has been switched
off (position 0), the appliance runs
automatically to the optimum position for
changing the tools.
0 = Stop
M = Instantaneous switching at
maximum speed, hold switch for
required blending duration.
Settings 1-7, Operating speed:
1 = low speed – slow,
7 = high speed – fast.
4 On/Off display
Is lit while the appliance is operating
(rotary switch on M or 1-7). Flashes if
the appliance has been operated incor-
rectly, the electronic fuse has tripped or
the appliance is defective – see section
"Troubleshooting".
5 Drive cover
To remove the drive cover, press on the
rear area and remove cover.
6 Drive for
– Continuous-feed shredder and
– Citrus press (optional accessory*).
When not in use, attach the drive cover.
7 Drive for tools (stirrer, whisk, kneading
hook) and mincer (optional accessory*)
8 Blender drive cover
9 Drive for blender (optional accessory*)
When not in use, attach the blender
drive cover.
10 Cord store
Stow the cord in the cord store
Bowl with accessories
11 Stainless steel stirring bowl
12 Lid
Tools
13 Stirrer
14 Whisk
15 Kneading hook with dough deflector
16 Accessories bag
For storage of the tools and cutting
discs.
Continuous-feed shredder*
17 Pusher
18 Cover with filling shaft
19 Cutting discs
a Reversible cutting disc – thick / thin
b Reversible shredding disc –
coarse / fine
c Fine grating disc
20 Disc holder
21 Housing with outlet opening
Safety systems en
23