DeWalt DCLE34031 Original Instructions Manual page 28

EngLIsh
Contents
• Laser Information
• User Safety
• Battery Safety
• Powering the Laser
• Operating Tips
• Turning the Laser ON
• Checking Laser Accuracy
• Field Calibration Check
• Using the Laser
• Maintenance
• Troubleshooting
• Accessories
• Service and Repairs
• Warranty
• Specifications
Laser Information
The DCLE34031 3x360 Laser is a Class 2 laser product. It is a
self‑leveling laser tool that can be used for horizontal (level)
and vertical (plumb) alignment projects.
User Safety
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in minor or
44mm x 39mm
moderate injury.
DEWALT Yellow (C:0, M:28, Y:98, K:0 )
26
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
If you have any questions or comments about this or any
dewalt tool, go to www.2helpU.com on the Internet.

WARNING: Never modify the tool or any part of it.
Damage to the laser or personal injury could result.

WARNING: Read and understand all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS

WARNING: Laser Radiation Exposure. Do not
disassemble or modify the laser level. There are
no user serviceable parts inside. Serious eye injury
could result.

WARNING: Hazardous Radiation. Use of controls
or adjustments or performance of procedures other
than those specified herein may result in hazardous
radiation exposure.

CAUTION: Keep fingers clear of the back plate and
stud when mounting with magnets. Fingers may
become pinched.

CAUTION: Do not stand underneath the laser when it
is mounted with the magnet bracket. Serious personal
injury or damage to the laser may result if the laser falls.
The label on your tool may include the following symbols.
V.............................volts
mW.......................milliwatts
.........................laser warning symbol
nm........................wavelength in nanometers
2.............................Class 2 Laser
Warning Labels
For your convenience and safety, the following labels
are on your laser.
WARNING: To reduce the risk of injury, user
must read instruction manual.
WARNING: LASER RADIATION. DO NOT
STARE INTO BEAM. Class 2 Laser Product.
WARNING: Keep clear of magnet. Magnet
hazard can disturb pacemaker operation
and result in serious injury or death.
If the equipment is used in a manner not specified
•
by the manufacturer, the protection provided by the
equipment may be impaired.
Do not operate the laser in explosive atmospheres,
•
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
Use the laser only with the specifically designated
•
batteries. Use of any other batteries may create a risk
of fire.
Store idle laser out of reach of children and other
•
untrained persons. Lasers are dangerous in the hands of
untrained users.